A thick and warm flange/chorus effect. Flanging and Chorus are closely related - the general difference being that flangers use a shorter time range and some amount of feedback (this intensifies the "jet-flyby" whoosh), whereas choruses utilize a slightly longer delay time, and no feedback.
MODE- Turns the flange/chorus on and off and sets the effect type and sync. The LED above the MODE button illuminates when the flange/chorus is enabled.
Off- Flange/chorus effect is disabled.
Flange- Enables flange mode.
Chorus- Enables chorus mode.
––––
Sync To Host Tempo- Enabling this syncs the flange/chorus mod rate to host tempo when using Chroma within DAW software, or to the current tempo in the top menu bar when using the standalone version. The RATE control will snap from 8 beats up to 1/64th note triplets.
RATE- Sets the flange/chorus internal LFO speed from 0.01 to 8 Hz. The LED above flashes to indicate the current mod rate.
DEPTH- Sets the depth of flange or chorus sweep.
DELAY- Sets the amount of delay time when in flange mode, from 1-13ms. This is disabled in chorus mode.
RESONANCE- Increasing the amount of Res intensifies the effect when in flange mode. This is also disabled in chorus mode.
MIX- The Mix control allows the overall effect intensity to be dialed back when desired. For standard flange/chorus effect behavior, leave Mix at 100.